EisSound 400 Series Instrukcja Instalacji Pobierz pdf (Strona 93)

100

Key Sequence Display Visual

INSTAL

X 64

To program the zone number, enter the installation menu. The identification

option is the first on the menu. Press the key to change the identification.

Change the value and press the key again to validate the selection

To program the group identification, enter the installation and scroll to that

option.Press the key to change the group identification, change the value

and press the key again to validate the selection

4.2.5.A. Zone Identification

4.2.5.B. Group

2’’

Enter the installation menu and scroll to that option

4.2.5.C. Mono/Stereo

stereo/mono

2’’

… CONTINUED

...

2’’

ADDRESS

ADR 1

ADR 64

group

gr 1

gr 3

A Control Unit is identified in the system by a zone identification number, a

group identification number (optional) and a name (optional). The zone identification number

must be a number between 1 and 250 and be different for each Control Unit installed.

It is not necessary for the numbers to be consecutive.

Before the zone identification is programmed, the Control Unit verifies that

no other zone exists with that identification number. If the number already

exists, the display shows an error message and the number is not stored.

If the zone identification selected is available, it is stored in the memory

Group identification numbers must be between 1 and 250. It is not necessary for the numbers to

be consecutive. Group identification “0” is reserved as global identification and all the system’s

Control Units have it by default.

Defines whether the Control Unit’s audio output (terminals 04, 05, 06) is connected in mono or

stereo mode. In a Control Unit in stereo, outputs 05 and 06 respond to the left and right

channels. In a Control Unit in mono, both outputs are identical and can

therefore be used interchangeably.

control

unit OFF

control

unit OFF

control

unit OFF

4.2.5. Control Units & : Installation Menu

428A1/A4

42992

428A1

CC-1023ENG-10

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 99 100

Komentarze do niniejszej Instrukcji

Brak uwag

EisSound 400 Series Instrukcja Instalacji Strona 93

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa EisSound 400 Series